Zhermack Tropicalgin Alginate Powder

In stock

  • Fast water absorption
  • Easy mixing
  • Homogenous mass, smooth, compact surfaces
  • Pleasant mango flavor
  • Normal setting
  • Long impression storage
Category:

Zhermack Tropicalgin Alginate Powder

Zhermack Tropicalgin Alginate Powder Zhermack Tropicalgin is normal-setting chromatic alginate with tropical flavor and is indicated for removable prothesis, study models, antagonists in the fixed and removable prosthesis. Zhermack offers a wide range of high-quality Alginate impression materials, engineered to meet each professional’s specific requirement.

INDICATIONS :-

  • Used for removable prosthesis, study models, the antagonist in the fixed and removable prosthesis.

ADVANTAGES :-

  • Fast water absorption
  • Easy mixing
  • Homogenous mass, smooth, compact surfaces
  • Pleasant mango flavor
  • Normal setting
  • Long impression storage
  • Safe disinfection with Zeta 7 Solution and Zeta 7 Spray Simple and fast mixing without bubbles with Alghamix II

Features :-

  • Three-phase chromatic alginate:
  • Red phase: mixing time
  • Light orange phase: working time
  • Yellow phase: time in the mouth
  • Normal working and setting time
  • Thixotropic
  • Mango flavor
  • Dust-free
  • Normal setting chromatic alginate with a tropical flavor.
  • It is easy to mix and has fast water absorption.
  • It is homogeneous, smooth, and gives compact surfaces.
  • Long Impression storage

Key Specifications :-

COMPOSITION :-

  • It contains potassium alginate, calcium sulfate, and a few other elements derived from brown algae.
Mixing Time1 minute
Max. Working Time1 minute 35 seconds
Time in Mouth60 seconds
Total time to set2-4.5 minutes
Elastic Recovery (ISO 1563)99%
Permanent Deformation (ISO 1563)11.5%
Compressive Strength (ISO 1563)1.4 Mpa

 

Packaging :-

  • 1 x 453gm Tropicalgin Alginate Powder

Direction to Use :-

DOSING AND MIXING –

  • Pour the content in the bag into an airtight container. The container has to be stored at a temperature of 5-27 degrees C/ 41-80 degrees F.
  • Using the dosing spoon, scoop out the powder into a rubber bowl, level it off by passing a flat spatula over the top of the spoon.
  • Repeat the process until you have the required quantity.
  • Measure out 1/3rd of water for every spoonful of powder.
  • Add the water and mix it according to the time specified in the table below.
  • Load the material onto the impression tray and insert it into the mouth before the end of the working time.
  • Wait till the material hardens and loses tackiness. Since Tropicalgin is chromatic, it is easier to identify the complete working phases.

Zhermack recommends ALGHAMIX II for the best homogenous and bubble-free mixing of the material.

  • Working time: 1 minute 35 seconds
  • Setting time: 2-4.5 minutes

CLEANING AND DISINFECTION OF THE IMPRESSION :-

Soon after taking the impression, rinse it off carefully to remove any traces of saliva. Drain off the excess water and disinfect immediately. Immerse the impression into a disinfectant solution. Please follow the manufacturer’s guidelines for the disinfectants. Pour the impression immediately using dental stones and in case if it is not immediately poured, store the impression in a sealed bag at room temperature.

 

Only logged in customers who have purchased this product may leave a review.

Reviews

There are no reviews yet.

Main Menu

Zhermack Tropicalgin Alginate Powder

Zhermack Tropicalgin Alginate Powder