1. Treatment of the restoration surface (pretreatment) For intraoral repair Roughen the restoration surface with abrasives (Diamond point etc.). Rinse with water and dry. Then, treat the surface with phosphoric acid based etching agent if necessary. Rinse with water and dry. For extraoral repair Roughen the restoration surface with abrasives (Diamond point etc.) or sandblast with 50 – 100 μm alumina particles. Rinse with water. Then, treat the surface with phosphoric acid based etching agent if necessary. Rinse with water and dry
2. For repairing metal-ceramic restoration including metal surface 2-1 Application of M.L. Primer (sold separately) Apply one coat of M.L. Primer using brush and leave undisturbed for 10 sec. 2-2 Application of opaquer (sold separately) Apply one layer of opaquer on the conditioned metal surface and light-cure using a dental handheld or laboratory light-curing unit
3. Application and drying of BOND I Apply one coat of BOND I on the entire surface to be repaired using a brush. Leave it undisturbed for 10 sec
4. Application and drying of BOND II Apply one coat of BOND II on the entire surface to be repaired using a brush. Leave it undisturbed for 10 sec
5. Light-curing (irradiation) Light-cure the surface with dental handheld or laboratory light-curing unit.
6. Application of composite resin Follow the instructions for use of resin material to be used.
- 1 x 6ml CRB 1
- 1 x 5mlCRB 2
- 25 x Micro brushes each (Pink & Yellow)
- Instructions
- 5 x Dispo Dish
by Twila
amazing bonding material. gives awesome results.
by August
A excellent bonding agent that creates a strong and durable bond even with a thin and transparent bonding layer..
by Brantley
COMFORTABLE!! Good an excellent bonding provided by CeraResin Bond between ceramic and resin materials and safe to use.