Pulpdent Porcelain Prep Kit

US$63.00US$90.00 (-30%)

In stock

  • For Preparing Porcelain Surfaces for Bonding
  • Protect soft tissue with Kool-Dam
  • One-minute application will not stain the ceramic
  • Contains Porcelain Etch Gel, Silane, Kool-Dam and Dry-Rite Drying Agent

Pulpdent Porcelain Prep Kit

Pulpdent Porcelain Prep Kit This economical kit for preparing porcelain surfaces for bonding contains Porcelain Etch Gel, Kool-Damâ„¢, Silane and Drying Agent. Use with your preferred composite or resin cement. The one-minute application of Porcelain Etch Gel will not stain the ceramic.

  • For Preparing Porcelain Surfaces for Bonding
  • Contains Porcelain Etch Gel, Silane, Kool-Dam and Dry-Rite Drying Agent

Features :-

  • For Preparing Porcelain Surfaces for Bonding
  • Protect soft tissue with Kool-Dam
  • One-minute application will not stain the ceramic
  • Contains Porcelain Etch Gel, Silane, Kool-Dam and Dry-Rite Drying Agent

Packaging :-

  • 2 x 1.2 mL syringe each Porcelain Etch Gel and Silane,
  • 1 x Kool-Dam
  • 1 x Drying Agent
  • Applicator tips

Direction to Use :-

  1. Protective eyewear must be worn by practitioner, assistant and patient. Protective gloves must be worn by practitioner and assistant.
  2. Place rubber dam to isolate operative site and protect soft tissue.
  3. Securely attach a green 18-gauge applicator tip to the Kool-Dam and apply a coat of Kool-Dam 1-2 mm thick on the gingiva or tooth surfaces requiring protection, if needed.
  4. Light cure for 10 seconds. Cures with all lights. must stand ready at chairside and hold vacuum tip 2-3 inches from porcelain surface during the etching process toevacuate acid fumes.
  5. Securely attach a 25-gauge applicator tip to the Porcelain Etch Gel syringe. Carefully start the flow of Porcelain Etch Gel on a pad and immediately dispose of this sample. Do not start flow in patient’s mouth. For maximum control of flow,  do not push on plunger with thumb. It is recommended instead to hold syringe barrel between thumb and forefinger while resting plunger in palm of hand. Gently pull back with thumb and forefinger to start flow. Never force plunger. Use a new applicator tip for each patient.
  6. Carefully apply Porcelain Etch Gel to porcelain surface and leave for one minute while evacuating fumes with vacuum. Cap syringe immediately after use.
  7. Remove etch gel with vacuum. Rinse treated surface with copious amounts of water and dry with clean, uncontaminated, oil-free and moisture-free compressed air.
  8. Securely attach red dropper tip to the Dry-Rite syringe and apply Pulpdent Dry-Rite drying agent to treated surface. To promote rapid drying, use a gentle flow of clean, oil-free air if desired. Cap Dry-Rite immediately after use.
  9. Securely attach red dropper tip to Silane syringe and apply Pulpdent Silane Bond Enhancer to the etched ceramic surface and allow to dry. Apply a gentle flow of clean, oil-free and moisture-free air, if desired. Cap syringe immediately after use.
  10. Proceed with repair or cementation of porcelain teeth, inlays or veneers using your preferred unfilled resin bonding agent and restorative resin or resin cement.
Average Rating

5.00

02
( 2 Reviews )
5 Star
100%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Only logged in customers who have purchased this product may leave a review.

2 Reviews For This Product

  1. 02

    by Winnie Wallis

    happy to buy my dental needs from your website. prompt delivery with good quality products

  2. 02

    by Alexander Esmann

    excellent product. Protect soft tissue with Kool-Dam

Main Menu

Pulpdent Porcelain Prep Kit

Pulpdent Porcelain Prep Kit

US$63.00US$90.00 (-30%)

Add to basket