DENTAsil C-Silicone Impression Material Intro Kit

Dentasil Putty:

• Total Working time: 1’15’’
• Time in the mouth: 2’30”
• Total setting time: 3’45”
• Shore A Hardness: 65
• Strain in Compression (%): 2-5
• Recovery from Deformation(%): >99.0
• Linear Dimensional Change(%): <0.3
• Colour: Yellow

DentaWash:

• Total Working time: 1’30”
• Time in the mouth: 4’00”
• Total setting time: 5’30”
• Shore A Hardness: 50
• Strain in Compression (%): 2-8
• Recovery from Deformation(%): >99.0
• Linear Dimensional Change(%): <0.6
• Colour: Blue

• 1 x DentaSil (Putty)-900 ml
• 1 x DentaWash-140 ml Light Body
• 1 x Dentacat-60 ml Activator Paste
• 1 x Scoop
• 1 x C-silicone Mixing Pad

Steps:-

• In Dosage of 1 scoop (18g) Putty add the diameter of the scoop (0.35g) of activator paste
• First Putty Impression with a tray loaded with Dentasil putty (mixture of Putty and activator)
• Put 2 equal layers of Dentacat and Dentawash as shown below in the mixing pad provided
• Mix them well for a double wash impression.

Precautions:-

• Overdosing of the activator reduces working and setting times.
• Underdosing of activator prolongs working and setting times
• Application is at 23°C±2°C/73°F±4°F,50±5% relative humidity
• Higher temperatures reduce working and setting times
• Lower temperatures prolong working and setting times