Woodpecker WT-2 Contactless Infrared Thermometer

ERGONOMIC DESIGN

• COmfortable design , reducing hand fatigue.

SEGMENTED BATTERY DISPLAY.

• The screen automatically displays a warning when the battery is low.

PRODUCT STRUCTURE AND COMPOSITION :-

• It is mainly composed of infrared sensor, circuit board, displaying components and casing.

LARGE HD  DISPLAY.

• High resolution displays offer enhanced clarity.
• The bigger the glasses (or wider the aspect ratio), the more pixels you’ll be able to see.

CONTACTLESS

• Easy to use. Just point and press the button and it reads the temperature so easily.

ACCURATE

• Provides fast clinical accurate precise reading with less than 1 sec measurement time.

SCOPE OF APPLICATION

• The product can be reused.

INDICATION :-

• Used to measure the heat radiation from the forehead, it can show the body temperature of the target group.

ADVANTAGE :-

• Contactless
• Easy to use
• Procvide accurate reading within 1 min.

• Product name : Infrared thermometer
• Model : WT-2
• Measurement site : Forehead
• Measuring range : 32.0 ℃ ～ 42.5 ℃
• Resolution : 0.1 ℃
• Maximum allowable error : 32.0 ℃ ～ 42.5 ℃ ± 0.3 ℃
• Battery prompts : low battery prompts
• Automatic shutdown time : If there is no operation for 60s, the device will automatically shut down.
• Size : about 153 × 93 × 41mm (length x width x height)

STORAGE CONDITION :-

• The product must be kept clean and stored in a dry place.
• Do not place the product in a place subject to electric shock.
• Do not store the product in extreme temperature environments above 55 ° C or below 20 ° C and humidity above 93%.

NOTE :-

• Type of protection against electric shock: Internal power supply equipment
• Degree of protection against electric shock: BF applied part
• Degree of protection against harmful ingress of water: Ordinary equipment.
• Degree of safety application in the presence of a flammable anesthetic mixture with air, oxygen, or nitrous oxide: Equipment cannot be used in the presence of a flammable anesthetic mixture with air, oxygen, or nitrous oxide.
• Type of operation mode: Continuous operating device
• The Infrared thermometer does not have an application part that protects against the
• effects of defibrillation discharge.
• The Infrared thermometer has no signal input or signal output.
• Rated voltage of the equipment: DC 3V.

• 1 x Infrared thermometer
• Instruction manual