Super Endo Shoulder Preparation Burs Kit

SuperEndo Shoulder Preparation Burs Kit is designed to offer speedy, simple and accurate tooth preparation for a wide range of crown and bridge restorations.

Special “Tissue-Protective End-Cutting Burs” for shoulder preparation and finishing under gingival margins without injuring the soft tissue.

Features :-

• Durable Burs with multi-layer coating.
• Silcon inside hold burs tightly
• Full set autoclavable.
• Evenly distributed diamond particles
• Sturdy built

Shank type – Friction grip

Construction – Stainless steel shank evenly coated with diamond particles

Autoclavable upto 134°C

Color Band On Shank :

• Regular – Blue
• Fine – Red

Set Of 13 Burs : 

• TR-13
• TR-11
• EX-18F
• SR-11
• TC-21
• TF-21
• TF-12
• SO-20
• SF-11
• WR-11
• WR-13
• FO-32
• FO-21

• 1 X  SuperEndo Shoulder Preparation Burs Kit (13 Burs)

• Insert the instrument as deeply as possible into the chuck (Friction Grip).
• Set the handpiece at the required working speed before applying the instrument to the treated area.
• Apply a maximum operating force of 0.4 [N] and do not exceed a speed of 230’000 [rpm].
• Activate water spray during the entire treatment (minimum 50 mL/min).
• Regulate water flow in case of water excess or shortage.
• It is recommended to use a dental dam.
• Use the instruments over the entire length of their working part and not just at the tip, so as to avoid an unconscious increase of the contact pressure causing local overheating.
• Once the preparation has been completed, remove the instrument from the site and allow it to come to a standstill.
• It is recommended to wear gloves and safety glasses.

Q. How do I prevent gingival tissues from getting injured ?

A. The use of tissue protective end cutting burs prevents injury to gingival tissues.

Q. Can these burs be autoclaved ?

A. Yes, these burs indeed come in a packaging that can be autoclaved and the burs can be reused thereafter.

Q. What should I do to prevent instrument fracture ?

A. Avoid jamming or levering actions when rotating, as this increases the risk of instrument breakage. Never exceed the specified maximum speed. Avoid applying forces greater than the recommended values, as this could cause damage to the instrument and the treated area. Always Check for possible damages; dispose of oxydized, blunt and eccentric instruments.

Q. When to dispose these Crown Preparation Burs ?

A. Check for possible damages; dispose of oxydized, blunt and eccentric instruments.