Super Endo Safe End Preparation Burs Kit

Friction Grip Safe-End Diamond Preparation Burs Kit

The safe-end, non-cutting tip prevents perforation of the pulp chamber floor or the root canal walls.

After initial penetration, the long, tapered bur creates a funnel shape for easier access in the pulp chamber.

Adequate access is essential for successful endodontic treatment. A straight line to the canal system is optimal. Without adequate access, instruments and materials become difficult to handle properly in the complex root canal system.

Advantage :-

• Achieve straight-line access to the apical foramen or to the initial. curvature of the canal.
• Locate all root canal openings.
• Conservation of healthy tooth structure.

Shank type : Friction grip

Construction : Stainless steel shank evenly coated with diamond particles

Autoclavable : Autoclavable upto 134°C

Set Of 9 Burs :

• 198-016S
• 508T-016S
• 508T-021F
• 508T-0215
• 508T-016F
• 508T-014S
• 198-021S
• BR-41
• BR-S40

• 1 X 9 Burs in SuperEndo Safe End Preparation Burs Kit

• Insert the instrument as deeply as possible into the chuck (Friction Grip).
• Set the handpiece at the required working speed before applying the instrument to the treated area.
• Apply a maximum operating force of 0.4 [N] and do not exceed a speed of 230’000 [rpm].
• Activate water spray during the entire treatment (minimum 50 mL/min).
• Regulate water flow in case of water excess or shortage.
• It is recommended to use a dental dam.
• Use the instruments over the entire length of their working part and not just at the tip, so as to avoid an unconscious increase of the contact pressure causing local overheating.
• Once the preparation has been completed, remove the instrument from the site and allow it to come to a standstill.
• It is recommended to wear gloves and safety glasses.

Q. What is the advantage of using these burs?

A. The safe-end,non-cutting tip prevents accidental perforation of the pulp chamber floor and the root canal walls.

Q. Can these burs be autoclaved ?

A. Yes, these burs indeed come in a packaging that can be autoclaved and the burs can be reused thereafter.

Q. What should I do to prevent instrument fracture ?

A. Avoid jamming or levering actions when rotating, as this increases the risk of instrument breakage. Never exceed the specified maximum speed. Avoid applying forces greater than the recommended values, as this could cause damage to the instrument and the treated area. Always Check for possible damages; dispose of oxydized, blunt and eccentric instruments.

Q. When to dispose these Safe End Preparation Burs ?

A. Check for possible damages; dispose of oxydized, blunt and eccentric instruments.