Bausch Fleximeter-Strips

• Easy to use
  
• Non Irritant
  
• Economical method used for checking high points
• Flexible non toxic strips
  
• Arti-Spot or Arti-Spray occlusion spray, can be used in combination to mark contact points

Fleximeter-Strips are used for specification of the preparation distance or the preparation height when preparing teeth for restorations (e.g. crowns and bridges), and to determine the material thickness needed to adjust bite guard splints.

Fleximeter-Strips are a useful innovation for the dentist and technician alike. These strips are flexible measuring instruments in three different thicknesses. They measure the height of the preparation on grinding teeth for restoration (e.g. crowns, bridges or telescopic crowns). The thicknesses of the Fleximeter-Strips 1,0 mm, 1,5 mm und 2,0 mm can also be used to enlarge the vertical dimension (height of bite).

Fleximeter-Strips, along with the liquid Arti-Spot or Arti-Spray occlusion spray, can be used in combination to mark contact points. Dentists can use the Fleximeter-Strips separately or in pairs, in the patient’s mouth as well as on models. Fleximeter-Strips can also be used in the laboratory. They are made from a special silicone rubber that can be sterilized up to a temperature of 200°C (390°F). Fleximeter-Strips can be sterilized prior to use.

Colour & Sizes :

• Pink strips – 1.0mm thick
• Green strips – 1.5mm thick
• Blue strips – 2.0mm thick

Bausch Fleximeter – Strips 1.0 mm (Pink) 15/ Pcs – BK 250

• 15 x Pink strips (1.0mm)

Bausch Fleximeter – Strips 1.5 mm (Green) 15/ Pcs – BK 251

• 15 x Green strips (1.5mm)

Bausch Fleximeter – Strips 2.0 mm (Blue) 15/ Pcs – BK 252

• 15 x Blue strips (2.0mm)

Bausch Fleximeter – Strips Mixed 15/ Pcs – BK 253

• 5 x Pink strips (1.0mm)
• 5 x Green strips (1.5mm)
• 5 x Blue strips (2.0mm)

Note : Before each use, Fleximeter®-Strips must be cleaned, disinfected and sterilized.

• Fleximeter-Strips (instruments) can be steam-sterilized (humid heat, 134°C).
• Fleximeter-Strips can be used in combination with the products Arti-Spot or Arti-Spray.
• Before disposing of Fleximeter®-Strips, they either have to be sterilized or disposed of with the normal contaminated practice waste.

Application :

• Fleximeter-Strips are used taking into account standard dental hygiene procedures.
• To accurately determine occlusal measurements, Fleximeter®-Strips are inserted between the affected teeth of the upper and lower jaw.
• Fleximeter-Strips can be used to change the occlusal spacing.
• To determine the raising of the bite, Fleximeter-Strips are inserted between the affected teeth of the upper and lower jaw.
• Depending on the respective indication, the entire surface or one end of the Fleximeter-Strips can be used.
• Fleximeter-Strips can be coated with a color layer of Arti-Spot or Arti-Spray.